How to Open an Inground Pool?

Spring is the time to prepare for your pool opening to people living in seasonal swim seasons. Although you can hire a pool cleaning service to help open a pool, many homeowners take pride and enjoyment in doing it themselves.

If you’re one of those people, you’ll want to keep some tips in mind before you get started. If you’re wondering how to open an in-ground pool this spring, check out this handy checklist for some simple steps to follow for an easy opening process.

Pool Opening Checklist

Beginning or opening up a pool is basic. It requires a touch of work and two or three different hands. Indeed, it’s ideal to begin 14 days before you need to open it for best outcomes and take a portion of the “latest possible time” stress away.

Regardless of whether you have an over the ground pool or an in-ground pool, the actual work is the equivalent or comparable. Follow these strides with subtleties & tips:

Eliminate all the leaves, earth, and trash from the winter spread before removing it. It is not revealed why individuals allow all the winter wrecks to simply go directly into the pool.  Discussion about additional work I’ve seen spotless “winterized” water become dark with the “tea” and trash from the winter.

Spend two or three half-hours scooping the abundance and collected leaves from the head of the spread. Keep in mind; it’s not merely the previous fall’s leaves; it’s the spring dust, tree “helicopters” and pine needles.

Eliminate all winter & ice extension plugs

You can’t begin the siphon and channel framework if the water isn’t spilling out of the pool to channel and back! Make certain to supplant the individual directional returns (eyeballs), pull grates, and Circulator fittings.

If you are utilizing standard, fixed eyeballs, ensure to guide the progression of water DOWN toward the pool’s base toward advancing the dissemination. For far superior dissemination, consider supplanting standard directional comes back with “the Circulator.”

Clean the deck and spread

One of the initial steps to opening a pool is removing the spread; before you do so, clean the deck zone to keep trash from being cleared into the swimming pool. This will give you some space to prepare the spread for capacity without stressing over sticks and stones penetrating the material.

For more escalated pool cleaning administrations, buy a little, compact siphon to eliminate standing water from the cover. Of course, you could simply snatch a nursery hose and brush to clear the flotsam and jetsam and soil aside for brisk cleanup.

Remove the pool cover and place it in storage

If you’re lucky enough to own an automatic pool cover, you’re good to go. If you have a winterizing cover, on the other hand, ask someone to help you remove it and lay it on a clean area of your deck.

[youtube_advanced url=”″ width=”600″ height=”400″ responsive=”yes” controls=”yes” autohide=”alt” autoplay=”no” mute=”no” loop=”no” rel=”yes” fs=”yes” modestbranding=”no” theme=”dark” playsinline=”no”]

This way, as a part of your pool cleaning service, you can scrub it with a mild detergent, hose it down and allow it dry before folding and storing it in a clean, dry place. Storing it in a dirty or wet state can cause major damage like rot and mildew.

Remove the plugs

Hopefully, the pool was winterized. If so, you should have plastic plugs in the water inlets, keeping water out of the pipes to don’t freeze and crack. If you winterized your pool with antifreeze, lower the water level to below these inlets. Next, remove the plugs and drain the antifreeze into a bucket.

Hook up all light fixtures

Often, companies that offer swimming pool cleaning services recommend lowering the water level for winterizing. When this is the case, they remove underwater light fixtures from their housing with the wires still connected to prevent lights from cracking under freezing conditions.

If yours were removed, coil the wire back inside the niche and snap the light fixture into place.

Set up your deck hardware.

If your jumping board, handrails, stepping stools, or slides were taken out, reinstall them. Additionally, splash a nut and fastener oil on all screws to keep them from rusting (sold at home improvement shops).

Reinstall skimmer containers and fittings.

If you eliminated the skimmer bushels from your in-ground pool, eliminate the winter plates, and reinstall the skimmers. Attach the hoses from the skimmer and bring planes back.

For every single pool, embed removable skimmer bins to get enormous flotsam and jetsam before going into the filtration framework. This goes far in regarding a fruitful pool cleaning administration.

Reconnect the pump, filter, and heater. If you removed the pump, reinstall it along with the filter and the heater if you use one. Ensure the fittings are tightened and cleaned. If you removed drainage plugs, valves, and pressure gauges, replace them as well.

You’re not working with a professional company, consult your owner’s manuals for help with start-up procedures.

Fill the pool with water

When opening a pool, ensure the water level reaches about midway on the waterline tile or to the middle of any skimmer weirs. You can also remove any stains or scale from the tile with any household tile cleaner.

Power up the pool

Switch the circuit breaker back on while keeping the equipment turned off until you can get back over to your pool. Ensure the valves are open and fill the pump with water for proper priming.

Switch on the circulation system, taking the time to search out leaks and cracks. Quickly turn the power off if detect any damage and consult a repair technician.

Treat the water

Test the water’s sanitizer residual, pH, and alkalinity using all-in-one test strips or test kits. Most pool cleaning service professionals recommend shocking the pool water, upon pool opening to kill bacteria and algae.

Run the system until the pool is clean and clear. Run the filter for 24 hours, vacuum debris, and retest the water. Some experts recommend reducing pump operation to one hour per day until normal filtration cycle time is reached

It’s a lot more enjoyable to swim in your pool than clean it. But knowing how to open an inground pool is the most important step to long-lasting swimming satisfaction!

Treating the Algae in the pool

Do you have to open the pool and get it operating immediately? No. You don’t have to go through all of that. But here are a few basic steps you can take now, about two months before normal pool opening to help take the worry of opening to a green pool.

  • Add a full initial dose of a good quality algaecide. They are more active at preventing algae as the water warms. Simply pull up a couple of places of the winter cover and pour it in. Take your skimmer net and mix as well as possible.
  • Use this with your swimming facility normally treated with chlorine, bromine, ionizing systems (Nature2 or Pool Frog), and salt or Mineral Spring systems.
  • If you use Pristine Blue to treat your pool, start similarly with a starting top-up dose of Pristine Blue bactericide. Pull back the cover in 3 or 4 places & pour a small amount in. Mix with a leaf skimmer as well as possible.
  • Add a dose of Pool Enzymes. Enzymes are great to begin consuming or eating up build-ups of organic waste that accumulate in the pool water. Again, just pour it under the cover and mix. Some of the best enzyme pool products are from Natural Pool Products, Natural Chemistry, and BioGuard. Add enzymes labeled instructions about 2 to 3 weeks before opening the pool for good results.
  • Spending a little money now on adding algaecide and enzymes will save you a LOT of money compared to treating a green and algae laden pool. These additions also help to prevent chlorine demand problems as well.
  • Consider attaching the pump & starting up the pool filter system. Running the filter system for several hours every day will have your pool water in fairly good & clean shape. Who knows, you will jump in as the cover comes off!

NOTE: It is very familiar for lots of bubbles to come out of the return fittings when starting. Even for up to 24 – 36 hours, some bubbles will remain in the plumbing system while returning to normal operation.

TIP: To make the filter start easier, open the “air bleeder” valve on the filter tank’s top when the filter starts. You will hear a big “whoosh” of air as it is pushed out of the filter when water gushes out, replace or close that valve. If your filter does not have a manual air bleeder temporarily remove the same results’ pressure gauge.

Never drain your pool. The liner will shrink, voiding the warranty, and could cause damage to your pool. In gunite, plaster, or even fiberglass, removing the water from the pool could result in the pool structure “floating” and causing serious damage to the structure. Always check with a local builder for specific instructions.



Leave a Comment