An Intex Pool vacuum is an affordable alternative to the installation of an in-ground pool. All types of Intex vacuums are available in different shapes and sizes for the convenience of different budget ranges and various yards. With an Intex pool vacuum, you will have much better memories of the summer. But to enjoy lovely summertime, you have to maintain your pool correctly.
The best way to save money on pool maintenance is by keeping the pool water clean, and on the same note, the best tool to achieve this is an intext pool pump. A pool pump on its own cannot do much, and this is why getting the right kind of vacuum is crucial. An intext pump’s design determines if the water in your pool will be clean, circulating water, or dirty stagnant water.
In this post, we are going to look at how to hook up a pool vacuum to intext pump
What Are the Functions of a Pool Pump and a Pool Vacuum?
Before we get to the steps to take to hook up a pool vacuum to your Intex pool pump, we must first get to know the pool vacuum’s functions and the pool pump.
After this, you will understand how these two synergizes in cleaning up the pool.
The Pool Vacuum
First, let us look at the pool vacuum. This machine works almost the same way that the ordinary vacuum cleaner in any household works. The only thing that makes them different is that pool vacuums are fitted with filters that trap pool debris in the system so that that the water circulated back into the pool is nice and clean.
The Pool Pump
Similarly, to the vacuum, a pool pump is a gadget used to suck in dirty water, filter it, and circulate it back to the pool. The difference between a pool pump and a vacuum is a pool pump is placed at a stationary position, whereas a vacuum is placed right at the center. Combining these two gadgets in the same pool will give you a cleaner pool in the shortest time.
How do you Hook up the Pool Vacuum to the Pool Pump?[youtube_advanced url=”https://www.youtube.com/watch?v=YEW-QUyP2Iw” width=”600″ height=”400″ responsive=”yes” controls=”yes” autohide=”alt” autoplay=”no” mute=”no” loop=”no” rel=”yes” fs=”yes” modestbranding=”no” theme=”dark” playsinline=”no”]
Now that we know how each of these systems works and how powerful they are together; we can now look at the individual steps of connecting the pool vacuum to the sand or any other pool pump type.
Step by step procedure on how to hook up a pool vacuum to the pool pump
The first step needed is unplugging the pump off the outlet to avoid the chances of being electrocuted in the process of hooking up the two devices.
After doing so, proceed to the hose connection in your pool to undo the screw. To achieve this, you turn the screw counter slowly in a clockwise direction then pull it out.
Mark a hose on one end “A” and tie in your hose adaptor on the hose and move it in a clockwise direction.
Then hook up your adaptor and the upper hose link, the one we talked about on the second step.
Make sure that all the hoses are screwed together and attached to the adapters in clockwise movements
Hold one end of a hose with a “D” mark and hook up the loose end to the clamp
Hook up the other open end of the hose in your hand to an upper connection on the vacuum and screw in the clamp. If you have a screwdriver, you can use it for this.
Now place your vacuum inside the pool. Ensure that all the assemblies made are submerged fully in the water. By doing this, they will take away all the excess air pressure in the hose and replace it with water instead.
Turn the upper air releasing valve in an anti-clockwise direction. You can achieve this in 2 revolutions to ensure that the vacuum is filled with water so that there is enough backflow.
For the last step, screw the air releasing valve safely towards the opposite direction so that the air is limited.
You have probably had enough of calling pool maintenance crew every time you need your pool cleaned. It can turn out to be quite expensive in the long run. Using those irksome wands does not help either because it is time and energy-consuming. Finally, you figure out that the time for change has come. Having done proper research, you decide to settle for one solution, the vacuum pool cleaners.
It might be an excellent solution, but with so many pools suction cleaners available in the market today, it can be quite overwhelming deciding on which one is the right choice for your pool. You would want the one with the most benefits, a time-saver, and the ability to work on its own so that you can have enough time to attend to other chores. It should also be able to get to every nook and cranny of your pool, no matter how murky or swampy your pool is.
The result should be a meticulous spic and span pool once the unit finishes with the cleaning process. So, it’s recommendable to use a pool vacuum with a pump?
Before settling on an intext pool pump, always ensure that the unit can move enough water to match your pool size appropriately. It would also be helpful to note that sand filter pumps are more durable but are not very useful in energy conservation. However, the bottom line is that intext pool pumps are the best choice for any above ground pool. The reason is that the filtering system for an above ground pool pump is correctly paired with the appropriate horsepower by intext in all its products
With the ten steps above, you would have successfully hooked up your pool vacuum to the pool pump, and in this setup, your pool will be cleaner in half the amount of time taken by an individual gadget.
These are the most straightforward steps that allow you to learn how to connect these two systems without calling in a professional installer.
We hope that our guide has been helpful to you!