Having a clean pool is every pool owner’s dream. Whether above or in-ground, keeping a pristine pool needs the use of the right cleaning tools. You have a hundred percent guarantee of a clean swimming pool when using a vacuum cleaner. On the other end, you can clean the bottom of your pool without a vacuum by using the right procedure and equipment.
For easier cleaning of your pool, reduce the amount of dirt forming at the surface or the pool’s bottom. You can do this by sweeping near the pool to remove all the dirt collected before removing the cover. Remember to replace the cap before exiting the pool; this ensures that no further fragments are gathered around the pool in your absence.
Whatever tool you want to use in cleaning your pool’s bottom depends on the amount of dirt or the type of dirt often invading your pool. In other words, a massive amount of debris needs the use of diverse methods and tools compared to an insignificant amount of junk.
To clean the bottom of your pool without a vacuum, take it slow in what you do. In case the pool lacks a filter, and small particles have invaded the bottom, it means your cleaning process will be effort-demanding. You will need to use a brush with a resilient, slow-moving process to get rid of the particles from the bottom and sides of your swimming pool without arousing them.
Once you have gently collected the particles from all sides of the pool, you need a dustpan to scoop them and a bucket outside the pool to place the debris. This means taking an extra effort to clean the pool without the vacuum.
Tools to use to clean the bottom of your pool[youtube_advanced url=”https://www.youtube.com/watch?v=K9JrQmseVco” width=”600″ height=”400″ responsive=”yes” controls=”yes” autohide=”alt” autoplay=”no” mute=”no” loop=”no” rel=”yes” fs=”yes” modestbranding=”no” theme=”dark” playsinline=”no”]
One of the simplest and easiest ways to get rid of lotion, insect repellents, and oil coming out of swimmers is using a tennis ball. You throw the tennis ball inside the swimming pool and let it do the magic work of removing all oily stains from the pool while it floats. After sometimes, the tennis ball is going to look dirty, dispose, and replace them.
Another simple tool to use in cleaning the pool without a vacuum is using a leaf rake. It is the best choice to collect large dirt like leaves, twigs, and flower petals from the pool. Be cautious about using a plastic leaf rake at the bottom of the pool to avoid scratching the surface. Remember to slowly and carefully collect all the debris at one spot with your leaf rake before removing them.
The use of a brush is one of the traditional and old-fashioned tools to clean the pool. They are the best choices used for long. To do the right job with it, you will need to get a brush according to your pool type. You will need a firm, bristly brush for hard and concrete floors while a vinyl lenient lining surfaces require a rubber or softer nylon brush.
In case your pool has a filter system, make use of it to do away with small fragments like algae and sand. You first have to clean your filter to be sure it works appropriately. After cleaning it, shut it off while using a brush to get rid of trivial particles in the pool water. When done, let your filter system deal with the rest as long as you used the right brush according to your pool type.
For pools without filters, getting rid of dirt like algae can be tedious. It will only mean you are taking sufficient time to clean the pool keenly. You will have to use a firm bristle brush to brush the debris and algae from the pool’s bottom and sweep the dirt. As you do the sweeping and brushing of waste, make sure you are gentle to stir up the dirt. After piling the dirt, take a dustpan, dive into the bottom, gently collect all the dirt for dumping.
How to Use the Shock Method?
The shock method is the cheapest and standard procedure used to clean and remove debris and algae from the pool. It is an effective method that needs the use of handy available tools. The tools include;
- A bucket
- Hand gloves
- Calcium hypochlorite pool shock in measured capacity
Steps to Use Shock Method to Clean Your Pool
- Take one pound of shock and mix it with hypochlorite in a bucket of water.
- Stir the content well and apply it to the affected areas in the pool.
- Let the pool run for twelve hours continuously for the content and pool water to mix evenly and kill germs and algae. The pool water should be cloudy in the process.
- After the twelve hours, use a clarifier to take the cloudiness away or let the pool run continuously for a full day to be clean.
Most swimming pool owners do not know that the constant cleaning of the pool keeps it safe from algae invasion. Therefore, it is crucial to clean the pool regularly to keep it safe and clean for swimming
How to clean these pools without a vacuum cleaner is another issue to pool owners- cleaning the pool with their bare hands can be tedious and labor-demanding. In the hand method, you will need to use a firm brush to carefully and gently brush the dirt at the bottom and sides of the pool. After collecting debris from the bottom of the pool, use an attachment and garden hose to remove the dirt and algae from the bottom of your swimming pool.
It is often phrased that prevention is better than cure- while cleanliness is next to God. These two should apply when it comes to pool maintenance. Clean the pool regularly, not to get infested with algae and large debris. Change the pool water often to keep away the growth of algae. You can also check if the pool is affected by algae by testing if your pool pump works efficiently. The more water circulation, the higher chances of algae absence.