Top 10 Best Red Dot For Hellcat – Picks And Buying Guide

Are you looking for the best red dot for hellcat? Congratulations if you are! We’ve saved you the hassle of reading through thousands of reviews, so you’ve reached the right place.

If you are struggling to find the best red dot for hellcat among the pool of available on the market, do not fret. We have compiled an extensive list of the top 10 best red dot for hellcat for 2022 for your convenience. Check out the list below that was compiled after long hours of research. Continue reading!

Disclaimer: We are using Amazon affiliate Product Advertising API to fetch products from Amazon, include: price, content, image, logo, brand, feature of products which are trademarks of Amazon.com. So, when you buy through links on our site, we may earn an affiliate commission at no extra cost to you.. Read more.

Top 10 best red dot for hellcat Reviews

1. Ade Advanced Optics RD3-018-SC Spike Micro Red Dot Sight for Springfield Hellcat OSP, P365XL Spectre Comp and Canik TP9 Elite SC

Features :

  • Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365X/P365XL/P365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint.
  • Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.
  • ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.
  • 4MOA, Weight approximately 17.6 grames(0.62oz), (Length)1.6″ x (Width).92″ x (Height).93″
  • Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.
  • Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distance/gap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight
  • For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE Spike’s rear white dot will act as a pistol factory original rear sight for Co-Witness.
  • Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cut/slide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.
  • ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you can’t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.

Additional Info :

Color White,Red

2. SPRINGFIELD ARMORY GE5077STNDRET Hex Dragonfly Red Dot Reflex Sight

Features :

  • 3.5 MOA Dot, Red 1 MOA Adjustment (160 MOA Windage and Elevation)
  • Manual On/Off, 8 Levels of Brightness Adjustment
  • (3) sets of screws included. Low Profile Picatinny Mount included
  • Glass Lens, Scratch Resistant / Anti Glare Coating
  • 6061 T6 Hardcoat Aluminum Housing. IPX7 Waterproof

Additional Info :

Color BLACK

3. Ade Advanced Optics Spike (RD3-018) Ultra Micro Red Dot Sight for Canik TP9 Elite SC, Canik Mete SFT, Sig Sauer 365XL, Ruger Max9 and Springfield Hellcat OSP

Features :

  • Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365X/P365XL/P365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint.
  • Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.
  • ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.
  • 4MOA, Weight approximately 17.6 grames(0.62oz), (Length)1.6″ x (Width).92″ x (Height).93″
  • Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.
  • Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distance/gap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight
  • For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE Spike’s rear white dot will act as a pistol factory original rear sight for Co-Witness.
  • Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cut/slide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.
  • ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you can’t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.

Additional Info :

Color White,Red

4. Ade Advanced Optics RD3-021-2MOA NUWA Micro Red Dot Sight for Springfield Hellcat OSP, Sig P365XL Spectre Comp and Canik TP9 Elite SC

Features :

  • Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365X/P365XL/P365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint.
  • Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.
  • ADE NUWA is the first(and the only)red dot with RMS/RMSc footprint that has TOP BATTERY LOADING system, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo. Battery life approximately 500-800 depends on the brightness setting.
  • 2MOA Red Dot. Weight approximately 15.5 grames(0.55oz), (Length)1.5″ x (Width)..88″ x (Height).89″
  • Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.
  • Ade Nuwa created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distance/gap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight
  • For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE NUWA’s rear white dot will act as a pistol factory original rear sight for Co-Witness.
  • For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE NUWA’s rear white dot will act as a pistol factory original rear sight for Co-Witness.
  • Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cut/slide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.
  • ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you can’t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.

Additional Info :

Color White,Red

5. TRUGLO TRU-TEC Micro Red Dot Sight Open Reflex Optic, Red Dot, Picatinny Mount

Features :

  • 3-MOA Red-Dot reticle for fast acquisition, 23mm x 17mm multi-coated objective lens, Digital push-button brightness controls, 10 brightness settings
  • Compatible with optic-ready pistols, Common lug and bolt pattern for maximum compatibility (Vortex, EOtech, Docter, Insight, Meopta, etc.)
  • Ultra-lightweight (just over 1 oz.), CNC-machined from aircraft-grade aluminum
  • Unlimited eye relief, Auto-off feature preserves battery life, Water-resistant (sealed o-ring design)
  • Picatinny / Weaver rail mount included

Additional Info :

Color Red Dot, Picatinny Mount
Item Dimensions
Height 3.25
Width 3.75
Length 5
Weight 0.5
Release Date 2019-10-24T00:00:01Z

6. Ade Advanced Optics Delta RD3-012 Red Dot Reflex Sight + Optic Mounting Plate for Springfield XD, MOD.2,XDm,XDS,XDE, Hellcat(Non-OSP) Pistol

Features :

  • Comes with a Picaitnny mount. Also comes with ADE all new designed adapter mount for Springfield XD, XDE 3.8XD MOD.2, XD3.3″/3.8″ Single Stack, XD(M), Hellcat (Non-OSP) Pistol. (It does NOT fit 5.25″ XDM competition series, it does NOT fit any OSP optics ready models)
  • While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
  • Delta RD3-012 Red dot. Top load System, no need to Remove the sight to change the Battery. 6 MOA dot. Come with Protected Cover, Adjustment wrench, Adjustment dialing plate, User Manual, Installation screws and Picatinny mounting plate.
  • 1.75″ length x1.25″ width x1.15″ height. Shockproof, Fogproof and waterproof for 30 minutes under 4ft water.Feature 1 M.O.A windage and elevation adjustments
  • Two button adjustments. One UP ARROW and one down ARROW to adjust brightness. Press and hold Up Arrow for 3 secs to power on, and hold Down Arrow for 3 secs to power off.

Additional Info :

Color Red

7. Ade Advanced Optics RD3-006B Green Dot Micro Mini Reflex Sight For Handgun

Features :

  • We have made several improvements since it’s initial release in 2016. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon.
  • Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
  • This GREEN dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP,
  • 3 MOA. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included)
  • Ade model RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS. Any Plate made for those brands also fits this sight.

Additional Info :

Color Clear,Green,Red
Item Dimensions
Weight 0.4

8. Ade Advanced Optics RD3-006A Green Dot Micro Mini Reflex Sight for Handgun

Features :

  • Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included).It is also compatible with varies handgun mounting plates that replace rear sight dovetail.
  • This Huracan Green Dot Sight fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided mount marked for Doctor/Venom type red dot.
  • However the front switch of the sight needs to trim down 2mm depends on exact pistol model if the pistol’s pre-cut is very short..
  • Comes with an removable picatinny mounting base to attach to any thing with piatinny rail. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Powered by a lithium CR2032 battery
  • ADE RD3 006,RD3 009,RD3 012,RD3 013,RD3 015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight.

Additional Info :

Color Green,Red
Item Dimensions
Weight 0.4

9. Ade Advanced Optics Crusader RD3-009 Red Dot Reflex Sight + Optic Mounting Plate for Springfield XD, MOD.2,XDm,XDS,XDE, Hellcat(Non-OSP) Pistol

Features :

  • Comes with a Picaitnny mount. Also comes with ADE all new designed adapter mount for Springfield XD, XDE 3.8XD MOD.2, XD3.3″/3.8″ Single Stack, XD(M), Hellcat (Non-OSP) Pistol. (It does NOT fit 5.25″ XDM competition series, it does NOT fit any OSP optics ready models)
  • While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
  • Crusader RD3-009 Red Dot. Shockproof, Fogproof and waterproof for 30 minutes under 4ft water. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
  • Fully windage and elevation adjustable and lockable; Unlimited Eye Relief
  • 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included)

Additional Info :

Color Clear,Red

10. Ade Advanced Optics HG54R Rechargeable Strobe Laser Sight for Pistol Handgun, RED for Springfield Hellcat Micro-Compact 9MM Pistol

Features :

  • Newly release for 2020 Shotshow by Ade Advanced Optics. Convenient charging by connecting the laser directly with the included magnetic USB cable. There is no need to remove a battery or plug into a port that will wear out over time
  • This is a new updated version of the HG54R laser which takes non-rechargeable battery. This new HG54R RECHARGE comes with a built-in lithium polymer battery gives up to 90 minutes per charge, and the built-in battery has approximately 600 life spans. Potentially saves $600+ spending on batteries
  • Offers the brightest Red laser allowed by Law. Non-handheld class 3R laser product, < 5Mw power output. Ultra lightweight and compact 1.79"L x 1.06"W x .85"H
  • Pat Pending mounting design provides two spring loaded pillar to push to rail slot for rock solid zero movement. Weight: 1.13oz (Battery included). Does NOT fits Berreta due to extra wide trigger guard.
  • Fit rail-equipped pistols, rifles and shotguns. The laser sight fits onto virtually any firearm with a modern (M1913 Pica tinny or Weaver-style) accessory rail

Additional Info :

Color Red
Item Dimensions
Weight 0.070625

Top 10 Recommendations and Buying Guide for best red dot for hellcats in 2022

Consider the Following Factors Before Purchasing Your First best red dot for hellcat.

Look up any product reviews on Google using the search bar.  market place products take the top spot, right? People should be running after market place products for a reason.

market place is not only a trusted platform, but it also communicates directly with manufacturers. For instance, what is more feasible for you – buying a new laptop from a retailer or directly from a manufacturer?

We would undoubtedly choose the latter option.

With thousands of manufacturers around the world, market place functions like a third party. It might be a plus point of market place that it provides a comprehensive guide for each laptop model.

There are vivid descriptions of all the product available on consumer reports, so it becomes easy to decide.

You can, for instance, go through the guide that contains information about the  best red dot for hellcat specifications, including their function, brand, and size.

Do you need a best red dot for hellcat that has a specific feature? market place has your back. You can browse through the list of preferred laptops using its best search tools. Select the one that matches your key feature expectations.

Doing your own research on the best red dot for hellcat is crucial. When buying, you might ask yourself the following questions:

  • Is the best red dot for hellcat worth buying?
  •  What are the benefits of best red dot for hellcat purchase?
  •  What factors should be considered when buying functional best red dot for hellcats?
  • Even with lower quality best red dot for hellcats, why is an investment in best red dot for hellcats considered important?
  • What are some good best red dot for hellcats in this market?
  • How will you find enough information on the best red dot for hellcat?

Your curious mind will have come up with way more questions related to best red dot for hellcat than what appears on this list. Thus, one way to satisfy your curiosity is to gather as much information as you can from renowned online sources.

Advantages of Buying Products from market place

The benefits of buying best red dot for hellcats, and other items from market place go beyond those mentioned above. Here are some of them:

Prices at the best price

market place provides the most amazing deals on many of its products, it goes without saying. Platforms work with a group of dealers and dealers to provide the best prices. Therefore, many intermediaries are cut, lowering the overall price of many items.

Trustworthiness

A global company, market place has branches, stores, and offices all over the world. They have a better delivery mechanism than other e-commerce platforms. Furthermore, their active customer service is just the cherry on top.

A large selection

Globally, market place has a huge customer base, as well as a huge seller base. As a result, you have access to a wide variety of products and services every day. What is your benefit?

Fishing can be done in many different ways. If you want to buy a hairdryer, you can view the various prices, models, and specs on the market place website. Select the best one from your preferred seller.

Reliable

Credibility is another advantage of purchasing from the market place website. market place has earned many positive customer reviews from its target audience worldwide since it has been in business for so long.

How to choose best red dot for hellcat

When it comes to electronics, market place is the undefeated champion.

A newbie might, however, find it challenging to choose a best red dot for hellcat. Even for early users, choosing the best product can be a challenge.

Here are some factors to consider when choosing a best red dot for hellcat on market place:

Pricing

Anyone would want the best deal. In this case, price is the most important consideration, especially if you purchase best red dot for hellcats from market place.

It’s unlikely you’ll meet a person who doesn’t enjoy buying decent products at affordable prices. You can avail yourself of different price ranges from different sellers on market place, compare them, and then choose the one you like best.

BRANDING

When purchasing best red dot for hellcats from market place, you need to evaluate the brand. Different sellers market different types of brands, so you need to know how to differentiate between them to make the right choice.

High-end products like Apple, for instance, have a high brand image, so they are more expensive than less popular brands.

Efficacy

Before purchasing a best red dot for hellcat, you must comprehend its operability. Mostly, it depends on the specifications of the product.

The more complicated the specs, the greater the functionality.

Customer Reviews From Old Users

This is what most smart buyers do. Old customers often provide feedback on their experience with best red dot for hellcat.

Scroll down the product page to see the review. They are usually displayed on the same product page.

If you read reviews, you can determine if the brand you are going for to buy best red dot for hellcat is good or bad!

Final Thoughts

That’s all you needed to know before getting a best red dot for hellcat. Best of luck with your new purchase! Please let us know what you think!

Leave a Comment