Top 10 Best Multi Extruder 3d Printer – Picks And Buying Guide

Features :

• Chimera is a 2 In 2 Out – Dual Extrusion System. Chimera is a neat and simple way in which to add conventional dual extrusion to your machine in a simple, air cooled package.
• Nozzles can be individually adjusted in height for an easy setup experience.
• Each nozzle is individually temperature controllable for ultimate material versatility.
• Chimera inherits the best from it’s cousins, V6 and Kraken, combining them into a single, reliable, yet highly capable hotend .
• If you have any questions, please feel free to contact us via email. We will reply you within 24 hours and help you solve the problem.

Features :

• Filament Size: 1.75mm; nozzle size: 0.4mm; heater wire: 12V/ 40W; Thermistor:100K NTC 3950, main heat sink block 60*27*27mm
• This extruder kit can be used as single color filament printing, dual colors filament printing or 3 colors filament switching printing, but not for mixing colors
• Bowden feeding, Compatible with Bulldog, Titan or other types of Bowden extruder (Bulldog extruder is recommended)
• Color switching is fast and stable, without significant print quality defects.
• Firmware modification is simple, easy to use

Features :

• WORKS OUT OF THE BOX: 3 steps to set up ANYCUBIC Mega S 3D printer with 8 screws and 3 cables for minutes, not only meets fast assembly needs for expert users but also friendly use to beginners. Printing volume reaches 8.27 x 8.27 x 8.07 inches.
• UPGRADED EXTRUDER DESIGN: Titan extruder provides precise extrusion for your 3D printing with solid filament drive and overall mechanical design compatible with most filaments, greatly reducing the clogging risk and improving printing accuracy. Works with 1.75mm 3D Printer Filament such as TPU, PLA, ABS, HIPS, WOOD, etc.
• RESUME PRINT & SENSOR DETECTION: Mega S 3D Printer can resume printing after power outage or any other unexpected stoppage.One click to resume from the last recorded position when suffering power outages. And the sensor pauses prints and sets off an alarm when you run out of filament which greatly saves time and cost , printing volume reaches 8.27 x 8.27 x 8.07 inches.
• ANYCUBIC ULTRABASE: Patented 3D printer printing platform surface coated with patented microporous coating, with excellent adhesion when printing and then effortlessly falls off the bed when it cools to room temp at the end of the print.
• MORE FUNCTION: ①ANYCUBIC MEGA S is an all-in-one frame 3D printer. The rigid metal frame can minimize the shaking to improve the print quality; ②The double-rod motor is more durable than the traditional clutch motor, does not lose steps, has high precision and more model details can be restored; ③TFT Touch Screen-As responsive as operating on the phone; ④All ANYCUBIC 3D printers backed with lifetime technical support and 24 hours professional customer service.

Features :

• Compatibility: Matches all 3D print extruder nozzles offered from E3D hotend, MK8 or MK10 hot end Makerbot RepRap, etc.
• Quantity and size: 5PCS in total, 1 pieces per specification, diameter specifications 0.2mm 0.3mm 0.35mm 0.4mm 0.5mm;
• Widely used: It can be used to accurately measure the diameter of nozzle holes. You can precision clean all of small size nozzles and other small parts by the tool kit, such as the throat and feeder gear, etc. You can also use 0.5mm needle to clean holes in larger diameter;
• Material: SUS304 stainless steel, it’s flexible and doesn’t break easily. It comes with a handle, so you can easily twist it in during use;
• Durability: It can be used heaps of times, because of SUS304 stainless steel material. It will neither rust nor be broken, no matter how it is used.

Features :

• Chimera is a 2 In 2 Out – Dual Extrusion System
• Chimera is a neat and simple way in which to add conventional dual extrusion to your machine in a simple, air cooled package
• Nozzles can be individually adjusted in height for an easy setup experience.
• Each nozzle is individually temperature controllable for ultimate material versatility.

Features :

• Chimera is a 2 In 2 Out – Dual Extrusion System
• Chimera is a neat and simple way in which to add conventional dual extrusion to your machine in a simple, air cooled package
• Nozzles can be individually adjusted in height for an easy setup experience.
• Each nozzle is individually temperature controllable for ultimate material versatility.

Features :

• Brass material advantage: The heat conductivity of brass is 7 times as high as that of stainless steel. MK10 hotend structure only allows filament to have little contact with the nozzle. The material of the nozzle must be brass to ensure filament’s temperature is the same as the thermistor, so it make the melt plastic more smooth. But the heat conductivity of stainless steel is so poor, it is unscientific and irrational used on MK10 nozzle.
• Compatibility: Fit with MK10 hotend M7 thread aluminum heater block, such as FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, FlashForge Finder, FlashForge Inventor, Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, Monoprice maker select plus, Qidi tech X-plus and X-max, Cocoon Create, etc.
• Quantity and specification: M7 thread nozzle, diameter size 0.2mm 0.4mm 0.6mm 0.8mm 1.0mm, 2 pieces of each size. For detailed dimensions, please refer to the drawings in the upper left.
• Multi Size: There are 5 commonly used sizes of nozzle diameter. You can experience different filament feeder rates.

Features :

• 【Independent dual extruder】Double efficiency of the mirror printing. Creator Pro2 make it come true that more complicated prints can be printed perfectly
• 【Heating bed】 Rapid steady heating prevent model warping much easier to take down models.It’s suitable for various 3d printer filament PLA,ABS,PETG,TPU etc
• 【Anti-scrape Design】Avoid scrap in the process of printing to get better printed results
• 【Out of box】Creator Pro is suitable for industrial design,tool design,architecture designer,mechanical designer etc
• 【What you get】Flashforge 3d printer Creator Pro2 12 months warranty, lifetime technical assistance and 24 hours professional customer service

Features :

• Premium Quality: MK8 nozzles are made of high quality Hardened Steel, Stainless steel and Brass.Heavy duty and provide a long service life.Easy to install and change.
• Package Include–Printer nozzles come with 25pieces MK8 nozzles in 7 sizes(quantity x output diameter): 3x 0.2mm, 3x 0.3mm, 7 x 0.4mm, 3 x 0.5mm, 3x 0.6mm, 3x 0.8mm, 3x 1.0mm,with 10PCS Cleaning Needles.
• Applicability and Compatibility–MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.
• Parameter: Input diameter 1.75mm; output diameter 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm; Screw thread: M6;Hexagon diameter: 6 mm.
• Excellent Cleaning Needles-The nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break. Perfect to handle tough extruder hot end nozzle clogs

Features :

• Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs.
• Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
• Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable.
• Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 110 degree.
• Strict Test: Strict testing for key components before delivery and life-time technical supports available.